ej 18 upgrade
ej 18 upgrade
i al looking at getting a gt forrester engine half cut i was wondering if it will all fit in to my car. i am getting an ej20t gearbox drive shaft and a rear end cradle, i have a 1995 subaru gx ej18. if it is possible how hard is it to do
If u are going to buy some thing Have a look at is review here http://www.productreview.com.au/?a_aid=b9d52f82
-
AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
What "subaru gx" you have? I suspect its an Impreza.m3rlin wrote:i al looking at getting a gt forrester engine half cut i was wondering if it will all fit in to my car. i am getting an ej20t gearbox drive shaft and a rear end cradle, i have a 1995 subaru gx ej18. if it is possible how hard is it to do
Yes it can be done, you will need the wire loom, engine etc, GT Foz engine is EJ20 Turbo, and if its an EJ18 Impreza it would have drum brakes in the rears (I'm unsure if there is discs on AWD models), would be ideal if you replaced them to discs.
Cheers
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic