exhaust
- tim_81coupe
- General Member
- Posts: 1693
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Perth
Have a look at the EA performance page. Covers it all pretty much.
Retain the standard headers or if you can, find a set of EA81 headers without the cat. Run 2" pipe the rest of the way and use a smaller muffler at the back, or a sports type.
Retain the standard headers or if you can, find a set of EA81 headers without the cat. Run 2" pipe the rest of the way and use a smaller muffler at the back, or a sports type.
82 MY Wagon, EJ20G
87 RX, EJ20G
89 Brumby, EA81
12 BRZ, FA20
87 RX, EJ20G
89 Brumby, EA81
12 BRZ, FA20
Also... if your planning on fitting a lift kit... wait till after the lift before u get the exhaust done... it wills it much higher that way. Cars that have been lifted without anything done to the exhaust can clearly be noticed by the exhaust dangling down.
Dave
Dave
EJ conversion wiring harness cut downs available. Please PM or email ([email protected]) for details.