Subie Boys , Lovey80 Resto

rtcb65 · Post by **rtcb65** » Fri Jan 01, 2010 5:04 pm

Ross got into some panel work today. Cleaned up the rear panel and put some etch primer on it while i played with the Leone.

Subiegirl · Post by **Subiegirl** » Tue Jan 05, 2010 11:28 am

You guys feel like doing my brumby??
haha yeah one day i'll have my dream machine modded and purring!

cheers
tash

rtcb65 · Post by **rtcb65** » Sun Jan 10, 2010 10:29 pm

Another panel straightened the best we can and etched up.

maxxair · Post by **maxxair** » Mon Jan 11, 2010 3:03 pm

heya Boyz. hows things. all good here. was hoping to have a relaxing time this year and get some brumby fixed, however ive worked out that in the 4 months ive set myself to have it finished there is only 380hrs if i do 10hour days all weekend.

i wont be able to get to the spaghetti, and im not sure how long it would take, surely longer than 10hrs, so its not really worth my while. illd reccomend sending it to the bloke who does it for 300bux, i can post straight from here. sorry for the f**k i mean Muckaround but i have too much on this year. cheers boyz, let us kno what u wana do. ta Rohan

phantomD · Post by **phantomD** » Mon Jan 11, 2010 3:30 pm

Loving your work and obvious hard effort guys. Once this project nears completion I will be able to use it as a high standard benchmark for my own efforts.

rtcb65 · Post by **rtcb65** » Mon Jan 11, 2010 5:16 pm

maxxair wrote:heya Boyz. hows things. all good here. was hoping to have a relaxing time this year and get some brumby fixed, however ive worked out that in the 4 months ive set myself to have it finished there is only 380hrs if i do 10hour days all weekend.

i wont be able to get to the spaghetti, and im not sure how long it would take, surely longer than 10hrs, so its not really worth my while. illd reccomend sending it to the bloke who does it for 300bux, i can post straight from here. sorry for the f**k i mean Muckaround but i have too much on this year. cheers boyz, let us kno what u wana do. ta Rohan

Hey Rohan,

Just drop it in next time you come by. There is no rush for it. We have all the looms to cover the cars that need them. Thanks for try though.

rtcb65 · Post by **rtcb65** » Mon Jan 11, 2010 5:18 pm

phantomD wrote:Loving your work and obvious hard effort guys. Once this project nears completion I will be able to use it as a high standard benchmark for my own efforts.

Thanks for the kind words.

rtcb65 · Post by **rtcb65** » Mon Jan 11, 2010 5:20 pm

One side now to etch stage. Now to start the other side.

maxxair · Post by **maxxair** » Fri Jan 15, 2010 1:11 am

too cool, just going to be waay too busy with other stuff. will do. cheers boyz.

rtcb65 · Post by **rtcb65** » Wed Jan 27, 2010 2:16 pm

Now that Ross's 81T is now in and going , we are now getting back to the brumby. Started on the other side .

rtcb65 · Post by **rtcb65** » Thu Jan 28, 2010 4:57 pm

Ross and i have now got the other side is to etch stage and started on the roof. Steve has started on getting the dints out of the doors, bonnet etc.

lovey80 · Post by **lovey80** » Sat Jan 30, 2010 5:05 am

Looking great gents...... Getting excited very excited..... Is there any further mods required before the engine can go in?

Cheers

Chris

rtcb65 · Post by **rtcb65** » Sat Jan 30, 2010 8:40 am

lovey80 wrote:Looking great gents...... Getting excited very excited..... Is there any further mods required before the engine can go in?

Cheers

Chris

Hey Chris,

Hows the weather over in Baghdad. Bet it is cooler than here. LOL . If you go back a couple of pages , you will see that the engine is siting in place . So is the gearbox. The whole drive train is in. Last time you were here, we decided to put the drive train in before the panel work, that way there wasn't any chance of getting any scratches when the engine went in.

rtcb65 · Post by **rtcb65** » Sat Jan 30, 2010 7:13 pm

Roof to etch stage and now starting on bolt on panels.

lovey80 · Post by **lovey80** » Mon Feb 01, 2010 8:30 pm

How did I miss that? Gold! Baghdad is pretty cool now but nothing crazy. I'll be lucky to wear a jacket during the day unless it really windy. I'll be home in march and strait up to say G'day.

Cheers chris.

subybrumby · Post by **subybrumby** » Mon Feb 01, 2010 9:02 pm

Keep safe, mate.

rtcb65 · Post by **rtcb65** » Thu Feb 04, 2010 6:12 pm

Another step forward. Two more items to etch stage. Outer tail gate panel and the the vent panel.

YouTube · Post by **El_Freddo** » Thu Feb 04, 2010 8:14 pm

That's EJ is looking quite at home in there

Got that wiring sorted?

Cheers

Bennie

rtcb65 · Post by **rtcb65** » Thu Feb 04, 2010 8:44 pm

El_Freddo wrote:That's EJ is looking quite at home in there Got that wiring sorted?

Cheers

Bennie

Hey Bennie,

Got a package deal , EJ, gearbox, computer and cut down loom. So i cheated , i got a loom for mine and copied it so i have one ready for my EJ 22 conversion. LOL.

AlpineRaven · Post by **AlpineRaven** » Thu Feb 04, 2010 9:28 pm

rtcb65 wrote:Hey Bennie,

Got a package deal , EJ, gearbox, computer and cut down loom. So i cheated , i got a loom for mine and copied it so i have one ready for my EJ 22 conversion. LOL.

Fair enough sounds good.. keep it up and cant wait to see the end project...
Cheers
AP