Every subaru 4 stud wheel
Every subaru 4 stud wheel
ok i think everyone has heard somthing about the 'bible' that ive been writing for the EA82 and 81.
onee section i am having a little trouble with is the wheel guide.
basically im looking for information on everysingle wheel that was made with a 4x140 pcd, not including converted or custom i redrilled 6 studs or blanks
info i need
-size
-designation (name of the wheel eg sunrasia)
-year available
-car available
this does extend to limited run rally rims but not performance superlites or the like
onee section i am having a little trouble with is the wheel guide.
basically im looking for information on everysingle wheel that was made with a 4x140 pcd, not including converted or custom i redrilled 6 studs or blanks
info i need
-size
-designation (name of the wheel eg sunrasia)
-year available
-car available
this does extend to limited run rally rims but not performance superlites or the like
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
Performance wheels
I have a set of Performance brand mags on my wagon. they are designated as the "Marque" as far as my reciept shows. I have seen these on the ol' Puegot 505 wagon and VK/VL commodores (no doubt commys were not same PCD, stud patt) Was told by tyre shop back in 1998 that these were the last set from the Performance factory (Brand spankers in the box, SO xciting at the time:-D). Will send you a photo soon as can..
Performance Wheels
hope I got this right, The attachments that is.
- Attachments
-
- PerformanceWheels3.jpg (82.05 KiB) Viewed 2163 times
-
- PerformanceWheels2.jpg (83.97 KiB) Viewed 2165 times
-
- PerformanceWheels1.jpg (92.85 KiB) Viewed 2179 times
- littlewhiteute
- Junior Member
- Posts: 623
- Joined: Sat Sep 30, 2006 7:22 am
- Location: Brisbane
hey LWU can i get you to take a photo of the wheels?
On the car or off doesnt matter, preferably clean
Just copy right again
On the car or off doesnt matter, preferably clean
Just copy right again
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
- littlewhiteute
- Junior Member
- Posts: 623
- Joined: Sat Sep 30, 2006 7:22 am
- Location: Brisbane
Will this work, or do you want a straight on shot?
http://www.scorpionsubaru.com/wheel.jpg
Mine are dirty, I'll clean them first.
http://www.scorpionsubaru.com/wheel.jpg
Mine are dirty, I'll clean them first.
Regards
Gary
Gary

that will work gary but with out the permission from scorpion subaru i cant use them
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
- T'subaru
- Junior Member
- Posts: 733
- Joined: Mon Oct 13, 2008 9:13 am
- Location: T'sunami Coast, Wa. ( usa )
here's a little info that may help out also
http://www.indysworld.com/80s/general/w ... heels.html
cheers, mark
http://www.indysworld.com/80s/general/w ... heels.html
cheers, mark
'86 GL, '89 RX, '89 XT6, '90 T'sunami Wagon
yeah i know toonga, im talking to him now.
I dont think ill put every single wheel in it, peugots, sunnies, scorpions but there were a lot more in the US and i just dont see the point in writing about non factory our of manufacture stuff
Im hoping he will allow me to use most of his stuff and i will acnowlage him as suppling those images thus the onus is on him to get it right
Yeah t'su
Im talking to the guy who runs that websit
I dont think ill put every single wheel in it, peugots, sunnies, scorpions but there were a lot more in the US and i just dont see the point in writing about non factory our of manufacture stuff
Im hoping he will allow me to use most of his stuff and i will acnowlage him as suppling those images thus the onus is on him to get it right
Yeah t'su
Im talking to the guy who runs that websit
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
ok i have permission to use the images as seen on subarus of the 80s, most of those images were taken by USMB members
but the biggest problem most arent good enough quility for print
i will work somthing out
but the biggest problem most arent good enough quility for print
i will work somthing out
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs