dirt cheap touring wagon parts

shuffbag · Post by **shuffbag** » Sat Aug 13, 2011 9:20 pm

Dann wrote:yeah I see what you mean about the fuel tank tony :S ... mmmm
yeah mabey not then mud_king91.
Finding it abit hard to get one with the lines in Perth at the moment though.

in my first swap i just used a efi tank and small metal pipe section that goes over the rear sub frame. i used the normal carby lines after that peice. works fine

Dann · Post by **Dann** » Sat Aug 13, 2011 11:32 pm

mud_king91 yeah that sound good hopefully we can mabey work something out

, and shuffbag yeah it's mainly the tank that I need but the lines are too.

Gannon · Post by **Gannon** » Sun Aug 14, 2011 12:17 am

mud_king91 wrote:My knuckle looks nothing like that

Sorry, that picture wasn't of an L series item, I was just using it to identify the part Im after, the shaft that joins the steering shaft to the steering rack with a uni-joint on each end.

If it come from an L series with power steering, it should fit, but can you send me a picture, just to be sure?

Did you end up finding a dead ECU case?

mud_king91 · Post by **mud_king91** » Sun Aug 14, 2011 9:34 am

Gannon wrote:Sorry, that picture wasn't of an L series item, I was just using it to identify the part Im after, the shaft that joins the steering shaft to the steering rack with a uni-joint on each end.

If it come from an L series with power steering, it should fit, but can you send me a picture, just to be sure?

Did you end up finding a dead ECU case?

I found the back of it i cant find the casing or top cover and yea ill get a pic once i get home

Gannon · Post by **Gannon** » Sun Aug 14, 2011 10:02 am

Back cover is fine, as long as it has the mounting holes that attach to the steering column