4WD VORTEX - who is running FWD Vort rear coils?

steptoe · Post by **steptoe** » Wed Aug 17, 2011 3:55 pm

Cranky would like to see a picture, get a story and some facts, please

RSR 555 · Post by **RSR 555** » Wed Aug 17, 2011 9:23 pm

I've asked Muzz what he did with his but no response yet. Will let you know when I know.

steptoe · Post by **steptoe** » Fri Aug 19, 2011 8:33 am

Thanks Paul. The answer seems to be in another [long winded] post. Anyone interested, refer there

showthread.php?t=11660&page=2

Post by **TOONGA** » Fri Aug 19, 2011 8:37 am

I will endeavour today to remove a rear wheel and take some photos of the rear setup on my vortex but I won't be able to botophucket them (Im popular)

I will have to try and make them small enough to be attachments on the board.
that way you can see what was done to Jetcar as my daughter has named it.

TOONGA

Post by **TOONGA** » Fri Aug 19, 2011 9:54 am

As promised photos

sorry about the quality I only have a phone camera

I don't like this set-up at all the shock mounts scrub on the CV casing. occasionally when I go over a medium sized bump, the car sounds like I've hit something really big on the road as it bottoms out.

TOONGA

steptoe · Post by **steptoe** » Fri Aug 19, 2011 1:06 pm

a measure from bottom bolt hole centre to lower col seat would also be something to look at..Read my update on the long post - retraction