Heres my Subie. WWYD?
Heres my Subie. WWYD?
I watched that old 80's Subaru XT add last night.
i wanted to be sure i had a super legit Subaru so i gave it a go myself.
Results:
Didnt go over so well.
thought long and hard and decided to make it super legit.
I think i need to ditch the factory air ride suspension for some beefier struts and springs. and defiantly get rid of those 13" donuts.
No one in my area lifts their subarus and none have even seen a XT
Came here to see what advice and insight you guys can give me.
has the been attempted on a XT????
i wanted to be sure i had a super legit Subaru so i gave it a go myself.
Results:
Didnt go over so well.
thought long and hard and decided to make it super legit.
I think i need to ditch the factory air ride suspension for some beefier struts and springs. and defiantly get rid of those 13" donuts.
No one in my area lifts their subarus and none have even seen a XT
Came here to see what advice and insight you guys can give me.
has the been attempted on a XT????
- TOONGA
- Elder Member
- Posts: 5335
- Joined: Sat May 30, 2009 10:15 am
- Location: Australind closer to where they divided by zero
- Contact:
Nice parking and well done.
The XT aka Vortex shares the same floor pan as the "L" series so a lift kit for an "L" will go straight in.
Sending a kit from Australia would cost a fortune, it could be an idea to get in touch with T'subaru and see where he got his lift kit from.
As for wheels Im sure there would be a billion more rims available from the wreckers there, or In the country below you.
TOONGA
The XT aka Vortex shares the same floor pan as the "L" series so a lift kit for an "L" will go straight in.
Sending a kit from Australia would cost a fortune, it could be an idea to get in touch with T'subaru and see where he got his lift kit from.
As for wheels Im sure there would be a billion more rims available from the wreckers there, or In the country below you.
TOONGA
- TOONGA
- Elder Member
- Posts: 5335
- Joined: Sat May 30, 2009 10:15 am
- Location: Australind closer to where they divided by zero
- Contact:
Im not sure what motor you have 4 or 6 or if your XT is 2wd, AWD or part time 4WD.86subieXT wrote:Perfect thats what i wanted to hear. keeping it nice and simple.
Now if one wanted something a little more heavy duty. as far as shocks and struts go, what could i pull them off of?
Newer legacy?
Im sure you cant use the later legacy suspension with out modification.
Replacement struts and springs are available for the XT, or the vortex as it is called in Australia.
TOONGA
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Hi and Welcome 86subieXT,
Nice XT4 Turbo you have there.. and I guess you didn't take heed to the words at the bottom of that vid. hahaha well worth the fun anyway.. and 10 points for trying
Most parts will be available to you either in your homeland or from the yanks.. but I'd try looking on Ebay for parts and try using searches for DL and GL from 1986 to 1990. Also it's a good idea to post here if you're unsure.. may save you some dollars and headaches
Nice XT4 Turbo you have there.. and I guess you didn't take heed to the words at the bottom of that vid. hahaha well worth the fun anyway.. and 10 points for trying
Most parts will be available to you either in your homeland or from the yanks.. but I'd try looking on Ebay for parts and try using searches for DL and GL from 1986 to 1990. Also it's a good idea to post here if you're unsure.. may save you some dollars and headaches
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
I picked the car up for 900$ canadian.
has 110,000kms 5 speed. 4cly turbo. with 4WD at the push of a button.
it has the air ride and self leveling suspension but its blown so it rides like a boat.
done minor mods.
3" turbo back exhaust.
Snow Performance methanol injection
HKS fuel cut defender.
Winter is coming here so i want to get it in the air.
there are absolutely no Subarus on the road older that 1992.
Im the only XT/Vortex i know of on the road in my province.
its cool but it means i can get parts if i tried.
there is however some older loyales in some wrecking yards.
I may pull the struts out of those and make some spacer plates as a lift kit.
sounds good on paper
has 110,000kms 5 speed. 4cly turbo. with 4WD at the push of a button.
it has the air ride and self leveling suspension but its blown so it rides like a boat.
done minor mods.
3" turbo back exhaust.
Snow Performance methanol injection
HKS fuel cut defender.
Winter is coming here so i want to get it in the air.
there are absolutely no Subarus on the road older that 1992.
Im the only XT/Vortex i know of on the road in my province.
its cool but it means i can get parts if i tried.
there is however some older loyales in some wrecking yards.
I may pull the struts out of those and make some spacer plates as a lift kit.
sounds good on paper
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Looks great washed.. would be something to keep there and at $900 you could get locked up for stealing
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- TOONGA
- Elder Member
- Posts: 5335
- Joined: Sat May 30, 2009 10:15 am
- Location: Australind closer to where they divided by zero
- Contact:
Don't forget to offset the bolts on the lift kit for the struts, for every 25mm you add you need 6-7mm offset on the kit.86subieXT wrote: there is however some older loyales in some wrecking yards.
I may pull the struts out of those and make some spacer plates as a lift kit.
sounds good on paper
this is a picture of most of a kit for an L series
TOONGA
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
I'd like to see the fuel economy differences on long trips.. and how does it go with rusting out your exhaust? I guess a stainless steel exhaust would be a must.
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Ok.. just thought it would speed up the exhaust rusting process.
When does it start to spray? just off idle, cruise or all the time?
When does it start to spray? just off idle, cruise or all the time?
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- TOONGA
- Elder Member
- Posts: 5335
- Joined: Sat May 30, 2009 10:15 am
- Location: Australind closer to where they divided by zero
- Contact:
Not sure if you have seen this but it is worth downloading just to see what another member has done to his vortex (did?)
downloads.php?do=file&id=20
TOONGA
downloads.php?do=file&id=20
TOONGA