Good Rad Shop wanted

Post Reply
User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Good Rad Shop wanted

Post by BlackMale » Wed May 24, 2006 5:18 pm

In this section as I am after WA specific.

Hey Crew,

Basically I want a good, and by good I mean exceptional radiator place/shop Any ideas? If I am willing to freight from the east coast so I am willing to travel the CBD and surrounds.

Let me know if you know of someone.
Thanks Fellas.

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Wed May 24, 2006 6:48 pm

Balcatta Radiators have always been good to me with my previous cars, the owner there deifnitely knows his stuff.

More recently I have dealt with Swan Radiators in Osborne Park (because they are close to my work). They built my custom L series radiator for me so they are not unreasonable when asked to take on a harder job!

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Wed May 24, 2006 8:28 pm

I know a GREAT oneway down rockingham way. But thats a little too far for u.

Dave
EJ conversion wiring harness cut downs available. Please PM or email ([email protected]) for details.

User avatar
tim_81coupe
General Member
Posts: 1693
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth

Post by tim_81coupe » Wed May 24, 2006 9:07 pm

Trevor from Willetton Radiators has always been a complete champ to me, very cheap, extremely cluey and very high level of work.
82 MY Wagon, EJ20G

87 RX, EJ20G

89 Brumby, EA81

12 BRZ, FA20

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Thu May 25, 2006 11:00 am

Thanks fellas i will call and dave get me the info i will be freighting from Qld if i do not have any sucess locally so Rockingham is close.

User avatar
aspro
Junior Member
Posts: 185
Joined: Wed Oct 05, 2005 10:00 am
Location: Argyle

Post by aspro » Thu May 25, 2006 11:51 am

http://www.ausubaru.com/main/modules.ph ... pic&t=1640

Check out this thread Jaffa, the guy I used was great and not expensive.

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Thu May 25, 2006 7:31 pm

Thanks Aspro i will be making some calls tomorrow (hopefully)

Post Reply

Return to “Western Australia”