pug wheels
pug wheels
Do all the 4 stud pug wheels fit the L series subaru's ?
Just so long as they are 4x140 PCD.96elefant wrote:Do all the 4 stud pug wheels fit the L series subaru's ?
I've had 14" pug alloys, and 15" pug steelies.
Heres a helpful link for all aftermarket wheels for subarus:
http://www.indysworld.com/80s/general/w ... heels.html
Brumby 1992: EA81, 15" peugot steelies, 2" ********* body lift, tonneau cover, bullbar, GME UHF, ARB compressor, ********* rear diff protector, SOLD
-97 Landcruiser
-97 Landcruiser

The 14inch Triangle (Australia) is pretty cool. Never seen them tho..
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon

Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
I reckon that page should be a sticky in the wheels/tyres section? What do you guys think?guyph_01 wrote:The 14inch Triangle (Australia) is pretty cool. Never seen them tho..
Brumby 1992: EA81, 15" peugot steelies, 2" ********* body lift, tonneau cover, bullbar, GME UHF, ARB compressor, ********* rear diff protector, SOLD
-97 Landcruiser
-97 Landcruiser

- steptoe
- Master Member
- Posts: 11582
- Joined: Thu Oct 06, 2005 10:00 am
- Location: 14 miles outside Gotham City
When I was in JAX looking at tyres, mentioned the lack of rims to suit old 4 stud Subes and the guy immediately rattled off 4 x 140 PCD as Subaru, Puegot and Chitroen! Check out your local Chitroen (spelled so it does not look like the French word for lemon) wrecker, carparks etc - maybe they do a 16" 4x 140 
I'm guessing JAX and Rodney Jane have no interest in our 4x140 interest in affordable racer boy rims around 99 bucks each?

I'm guessing JAX and Rodney Jane have no interest in our 4x140 interest in affordable racer boy rims around 99 bucks each?
If they're from a 504 or 505 you'll be fine. The 505's got the 390mm alloys so be careful. If they're steel they'll be 14s or 15s.
Some 504's have different lug nuts too, which are unique to Peugeot. Quite difficult to obtain.
Some 504's have different lug nuts too, which are unique to Peugeot. Quite difficult to obtain.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.