Bash Plate Question

Corax · Post by **Corax** » Thu Sep 06, 2012 11:24 am

Hi All,

Quick question - would a bash plate off a 2002 forester fit onto a 1999 forester? Ie are all the mounting points the same etc?

Cheers,
Corax.

taza · Post by **taza** » Thu Sep 06, 2012 2:03 pm

Sure will Corax!

RSR 555 · Post by **RSR 555** » Thu Sep 06, 2012 3:52 pm

Is the 2002 Foz a SF or SG model?

I would say if it's a SG sump guard then it would be close but not exactly the same as the SF model.

taza · Post by **taza** » Thu Sep 06, 2012 4:21 pm

2002 is SF model. Only late 02 in December they changed to the SG5.

Davidov · Post by **Davidov** » Fri Sep 07, 2012 12:11 am

taza wrote:2002 is SF model. Only late 02 in December they changed to the SG5.

Which means it could possibly still be a SG in 02.

taza · Post by **taza** » Fri Sep 07, 2012 12:23 am

Davidov wrote:Which means it could possibly still be a SG in 02.

Unlikely though as not many were made in that 2nd half of the yr. They will still fit though but need modification, a grinder would work :P

RSR 555 · Post by **RSR 555** » Fri Sep 07, 2012 12:46 am

The first SG model was release in Sept 02 in Australia. The First SG model was off the production line at FHI in early 02.

So.. it could be either. I know the likelihood of it being a SG model are slimer but you still need to make sure information given is going to be correct first.

stilson · Post by **stilson** » Fri Sep 07, 2012 2:07 am

Pfft, correct information.

What kind of a forum is this?

RSR 555 · Post by **RSR 555** » Fri Sep 07, 2012 3:41 pm

stilson wrote:Pfft, correct information.

What kind of a forum is this?

I know hey.. sorry for dropping my standards