I make giant jengas

Post by **TOONGA** » Sat Nov 10, 2012 10:17 am

While the title may be a little misleading. I'm working again (praise Jebus the redneck son of gawd) and here is a run down of what Im doing for now. while Im on work probation.

Our area is called process panels we get reject panels and do this...

the boards are cut to pre determined sizes and lengths

they are then glued and place in offset

this is the near completed stack

we work on the stacks from the day before it goes in this end

and comes out like this

big box makes noise bearers come out

it isn't rocket science but I'm working and if I was working on Saturdays, I would be on exactly the same money I was making in Karratha.

TOONGA

RSR 555 · Post by **RSR 555** » Sat Nov 10, 2012 10:34 am

TOONGA wrote:it isn't rocket science but I'm working and if I was working on Saturdays, I would be on exactly the same money I was making in Karratha.

Lucky for you it's not 'rocket science'

Sounds like a paid job and that's what counts, so congrats on finding something and hope it turns into something long term. Speaking of paying, it sounds like they pay well, so you better work hard at this job and make a good name for yourself and then you can pay off your debts

Oh and what are these???

TOONGA wrote:big box makes noise bearers come out

Post by **TOONGA** » Sat Nov 10, 2012 10:45 am

RSR 555 wrote:Lucky for you it's not 'rocket science'

Sounds like a paid job and that's what counts, so congrats on finding something and hope it turns into something long term. Speaking of paying, it sounds like they pay well, so you better work hard at this job and make a good name for yourself and then you can pay off your debts

Oh and what are these???

Yeah we have discussed the debt thing

go have a coffee will you

the bearers are just that

we make them to put under the A grade sheets of particle board made in the plant. (they are called gluts as well) if you look closely you will see them under the packs we are making. if it is moved by a forklift then it has them under it.

TOONGA

RSR 555 · Post by **RSR 555** » Sat Nov 10, 2012 10:53 am

TOONGA wrote:Yeah we have discussed the debt thing go have a coffee will you

the bearers are just that we make them to put under the A grade sheets of particle board made in the plant. (they are called gluts as well) if you look closely you will see them under the packs we are making. if it is moved by a forklift then it has them under it.

TOONGA

COFFEEEEEEE .. need coffee

Oh.. yes I know what gluts and bearers are, just never heard them being called 'noise' bearers, so I thought it was something special.

And if you get discounted prices at work, I might have a way for you to pay off some debt

Post by **TOONGA** » Sat Nov 10, 2012 4:45 pm

RSR 555 wrote:COFFEEEEEEE .. need coffee

Oh.. yes I know what gluts and bearers are, just never heard them being called 'noise' bearers, so I thought it was something special.

And if you get discounted prices at work, I might have a way for you to pay off some debt

Will see what I can do, first grade or are seconds ok? by seconds I mean the sheet has a mark or a burn on it, from the process of being made.

Big box makes noise, bearers come out.

That better?

TOONGA

steptoe · Post by **steptoe** » Sat Nov 10, 2012 9:17 pm

why would a sheet with a bum on it be anything Paul wants ?

RSR 555 · Post by **RSR 555** » Sun Nov 11, 2012 1:45 am

TOONGA wrote:Will see what I can do, first grade or are seconds ok? by seconds I mean the sheet has a mark or a burn on it, from the process of being made.

Seconds are fine.. can you let me know sheet sizes?

TOONGA wrote:That better?

Yep.. thx

RSR 555 · Post by **RSR 555** » Sun Nov 11, 2012 1:53 am

steptoe wrote:why would a sheet with a bum on it be anything Paul wants ?

All will be revealed soon enough

Post by **TOONGA** » Sun Nov 11, 2012 8:06 am

steptoe wrote:why would a sheet with a bum on it be anything Paul wants ?

RSR 555 wrote:All will be revealed soon enough

I'm not sure what he is up to now ... I actually went back and made sure I had spelt burn not bum. (no editing invloved)

anyone?

and what size sheets do you want? thickness? length? width? this is one of the 6 manufacturing plants in Australia, and I have seen sheets bigger than the length and width of a brumby.

TOONGA

RSR 555 · Post by **RSR 555** » Sun Nov 11, 2012 9:40 am

TOONGA wrote:I'm not sure what he is up to now ... I actually went back and made sure I had spelt burn not bum. (no editing invloved)

anyone?

No INVLOVED needed ??

TOONGA wrote:and what size sheets do you want? thickness? length? width? this is one of the 6 manufacturing plants in Australia, and I have seen sheets bigger than the length and width of a brumby

I'd like them 2400x1200x19 but what ever you get in '2nds' will be fine

Post by **TOONGA** » Sun Nov 11, 2012 9:45 am

splet bled id nut gud, I nut bum shet machene is.

work that out

I will find out what is available and the price of firsts and seconds.

How they get to Rockingham will be up to you as 2400 x 1200 x 19 won't fit in the brumby.

TOONGA

RSR 555 · Post by **RSR 555** » Sun Nov 11, 2012 10:05 am

TOONGA wrote:splet bled id nut gud, I nut bum shet machene is.

work that out

I will find out what is available and the price of firsts and seconds.

How they get to Rockingham will be up to you as 2400 x 1200 x 19 won't fit in the brumby.

TOONGA

yeah I get it.. you're a dumb ass

lol

Thanks and depends on what sizes you find, I'll bring either the car trailer or quad bike trailer