SHOW US YOUR MOTOR
- chubby37
- General Member
- Posts: 1057
- Joined: Tue Oct 04, 2005 10:00 am
- Location: IN HELL!!!or known as ipswich
SHOW US YOUR MOTOR
how about we let others see what we got...show off our handy work a bit...post links here or pics of what you have done to your motor as in eather detail work/pods or some other wild add on.
i,ll start- http://ausubaru.com/main/modules.php?na ... opic&t=122
i,ll start- http://ausubaru.com/main/modules.php?na ... opic&t=122
- subarursliberty
- Junior Member
- Posts: 200
- Joined: Tue Oct 04, 2005 10:00 am
- Location: South West Sydney
- Contact:
- hughybabes
- Junior Member
- Posts: 81
- Joined: Thu Oct 06, 2005 10:00 am
- Location: upwey/ victoria
- BaronVonChickenPants
- General Member
- Posts: 1187
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Nowra, NSW
I used to have some nice pics of my EA82T that I posted ages ago on the old board but due to a hard drive failure I lost them, dont spose anyone out there would have a copy of them, it was the EA82T with the red inlet manifold and the polished SS crossover pipe and was on an engine stand at the time.
Cheers
Grant
Cheers
Grant
- subarursliberty
- Junior Member
- Posts: 200
- Joined: Tue Oct 04, 2005 10:00 am
- Location: South West Sydney
- Contact:
its in
new exhaust headers.
Slotted it in with my old s-hitachi carb (for now)
runs like a champion
it did have a bit of a lifter tick issue at first, but found out the mechanics used dodgy oil and some crappy oil filter without the return valve. after that, runs like clockwork!
thanks again

new exhaust headers.
Slotted it in with my old s-hitachi carb (for now)
runs like a champion
it did have a bit of a lifter tick issue at first, but found out the mechanics used dodgy oil and some crappy oil filter without the return valve. after that, runs like clockwork!
thanks again

1998 Subaru Legacy GTB
- Suby Wan Kenobi
- General Member
- Posts: 1914
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Sunny Godwin Beach Qld