Could this be my fuel pump?

Having issues with your ride ? Ask away in here ...
Post Reply
User avatar
jims
Junior Member
Posts: 162
Joined: Fri Dec 07, 2012 5:00 pm
Location: Kalamunda

Could this be my fuel pump?

Post by jims » Wed Aug 07, 2013 6:54 pm

Hey everyone,

Trouble with the l series and similar to what I have experienced before. Engine running fine when you are on the throttle but as soon as it drops back to idle it cuts out. Keep it above 1000rpm and it is okay but below that and it konks out. Carb has been rebuilt, Checked Pcv? valve, and idle solenoid. All seem okay. Could this be my fuel pump on the way out?

Cheers,
James

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Thu Aug 08, 2013 9:04 am

You'd think anything but fuel pump - float setting in carby ? Can you see a little window ?ao

User avatar
jims
Junior Member
Posts: 162
Joined: Fri Dec 07, 2012 5:00 pm
Location: Kalamunda

Post by jims » Thu Aug 08, 2013 10:48 am

No window to float level on mine but was reset only four or five months ago. Will give the idle jet and carb a good spray with cleaner to see if I can 'flush' out the problem.

User avatar
El_Freddo
Master Member
Posts: 12627
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Thu Aug 08, 2013 10:16 pm

I'd say blocked idle jet - from my limited knowledge of carbies these days!

Have you run your tank low recently - you may have picked up some crap that's passed through the fuel filter and ended up in the carb blocking something to do with the idle mixture.

My thoughts anyway!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
stork955
Junior Member
Posts: 23
Joined: Tue Jul 17, 2012 5:49 pm
Location: Tassie

Post by stork955 » Fri Aug 09, 2013 7:25 am

G'day, check the idle cut solenoid. It should click when connecting and disconnecting it with the ignition on.

Cheers,

Stork

User avatar
jims
Junior Member
Posts: 162
Joined: Fri Dec 07, 2012 5:00 pm
Location: Kalamunda

Post by jims » Fri Aug 09, 2013 1:56 pm

Thanks guys,

Yep checked the idle cut solenoid.

You might be onto something there Bennie. Did run the tank low recently. Gave the idle jet a good spray with cleaner and the problem has gone away. Thanks for the advice!

User avatar
El_Freddo
Master Member
Posts: 12627
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sat Aug 10, 2013 8:10 pm

jims wrote:Thanks guys,

Yep checked the idle cut solenoid.

You might be onto something there Bennie. Did run the tank low recently. Gave the idle jet a good spray with cleaner and the problem has gone away. Thanks for the advice!
No worries, that's what we're all here for!

Replace your fuel filters too ;)

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

Post Reply

Return to “Trouble Shooting”