List of 4x140 PCD Wheels ...

Post by **Bantum** » Tue Sep 23, 2014 11:16 am

sublime wrote:... Those rims are from a Subaru Justy ...

Thanks - Didn't think it was 4 x 140 mm PCD ...

P.S. - I like the brochures, makes me want one of them too ...

Cheers, Bantum ...

sublime · Post by **sublime** » Tue Sep 23, 2014 1:24 pm

Lots of brochures on the site (sorry a little of topic) but you can see the PCD 140 optional wheels that were available over the years...

http://a15ff11300g.sakura.ne.jp/catalog ... logue.html

Post by **Bantum** » Wed Oct 29, 2014 2:54 am

Usual story - while surfing the net I came across one of these :

14" x 6J +? 4x140 - Found here : http://www.oldschoolhr.com/forum/index. ... c=21232.60

Another one to add to the list - I haven't seen it anywhere before either ...

Cheers, Bantum ...

Willy Fisterbottom · Post by **Willy Fisterbottom** » Wed Oct 29, 2014 6:59 am

Bantum wrote:Usual story - while surfing the net I came across one of these :

14' 6J 4x140 - Found here : http://www.oldschoolhr.com/forum/index. ... c=21232.60

Another one to add to the list - I haven't seen it anywhere before either ...

Cheers, Bantum ...

Nice, they look like Bathurst globe wheels.

JP147 · Post by **JP147** » Wed Oct 29, 2014 6:05 pm

I have a set of these Cheviot 14"

Then I have these crazy offset wheels. They even stick out past the fenders when on backwards.

This is what they look like when on backwards

Willie · Post by **Willie** » Thu Oct 30, 2014 7:39 pm

Bantum wrote:Steptoe has found another :

Anybody know what it is ?

Cheers, Bantum ...

I had a set of these (in white) on my '86 RX Turbo in 15".

Willie · Post by **Willie** » Thu Oct 30, 2014 7:42 pm

Bantum wrote:& just to make sure you not confused yet, we also have these in 14" ...

Jacksons : ( 14 x 6" +? )

Speedy Desert Rats : ( 14 x 6" +? )

+ any others out there yet to be found ...

Note : When I mention the term 'Wagon Wheel' I'm referring to the number of spokes - usually 8 ...

Cheers, Bantum ...

I had a set of these in 14" on my '83 MY wagon with 2" lift

Post by **Bantum** » Mon Nov 03, 2014 2:36 pm

JP147 wrote:

Got any more Info / Front on shot of these ? Dimensions, Stamping etc. would be handy ...

Cheers, Bantum ...

Post by **Bantum** » Mon Nov 03, 2014 2:41 pm

These also turned up ( thanks to Lee & Willy ) :

Not sure of the dimensions but was given : 15" x 7" +? ( offset ? )

Found here : http://www.ebay.com/itm/BRUMBY-LEONE-L- ... 7675.l2557

Edit : P.S. - Waiting on a better shot - ebay ones have gone ...

Cheers, Bantum ...

sublime · Post by **sublime** » Mon Nov 03, 2014 5:39 pm

Try these:

Venom · Post by **Venom** » Mon Nov 03, 2014 9:22 pm

14x6 Rally Harts.

JP147 · Post by **JP147** » Sat Nov 08, 2014 3:34 pm

Bantum wrote:Got any more Info / Front on shot of these ? Dimensions, Stamping etc. would be handy ...

Cheers, Bantum ...

They are 13" and the tyres on there now are 205 wide. There are no stampings on the wheels.
Someone told me once that they might be a replacement for Mazda Bongo rear duallies. They must not be common though because I have never seen or heard of any others.

I am not sure what you meant by front shot, but here are 2 more pictures:

I put a ruler into one, it is probably over 10cm deep from the centre to the outer rim.

Post by **Bantum** » Tue Nov 25, 2014 9:15 pm

Thanks JP, will add it to the list ...

Mean while, here is some Facebook action to keep an eye on:

https://www.facebook.com/media/set/?set ... 532&type=1

Edit : FB has deleted these again ... argg ...

Cheers, Bantum ...

Post by **Bantum** » Thu Jan 01, 2015 10:51 am

Another wheel that has turned up on FB :

14x6" 'Eight Spoke' by Gecko Wheels ... ( & from all reports you can order them with the correct PCD )

For more see here : http://www.geckowheels.com.au/index.html

Cheers, Bantum ...

majordad1 · Post by **majordad1** » Sat Jan 03, 2015 6:49 pm

Found these wheels on UFOwheels,com a Chinese factory who will ship to Australia provided a minimum of 40 wheels are ordered 14 x 6" with 4 x 139.7 PCD. USD 22.00 painted USD34.00 Chromed + Freight cost which they will send an estimate on. Problem is getting 10 bods interested

JP147 · Post by **JP147** » Sat Jan 03, 2015 8:38 pm

majordad1 wrote:Found these wheels on UFOwheels,com a Chinese factory who will ship to Australia provided a minimum of 40 wheels are ordered 14 x 6" with 4 x 139.7 PCD. USD 22.00 painted USD34.00 Chromed + Freight cost which they will send an estimate on. Problem is getting 10 bods interested

I would get 5, one for the spare. You might not need 10 people.

littlewhiteute · Post by **littlewhiteute** » Sun Jan 04, 2015 5:05 am

A good presentation of what is available.

PCD stands for Pitch Circle Diameter:

http://www.wheelfitment.eu/what-is-the-PCD/

Nubaru · Post by **Nubaru** » Sun Jan 04, 2015 11:26 am

not speaking for myself, there may be more interest in 15" rims and if they are that cheap before landing, maybe insist on min order from in here of six - a spare and spare spare. Faster way to build up the numbers

majordad1 · Post by **majordad1** » Sun Jan 04, 2015 1:04 pm

Only prob is they don't do a 15" in the 139.7 x 4 PCD that I could see unless I missed something. Have a look at UFOwheels.com

majordad1 · Post by **majordad1** » Tue Jan 06, 2015 9:03 pm

Further development on the UFOwheels.com China connection. The maximum offset available with the 14 x 6 wheel is a +18mm. Standard Brumby with 13 x 5.5 " factory Sunny's is a + 42mm. Difference of 24mm + 12mm additional rim width would see a tyre on the front sticking out beyond the guard edge which would invite all sorts of issues with scrubbing. They have said the could set up a greater offset but would require a large order of 100 + wheels. To bad so sad worth a try I guess

The AUSubaru.com.au Forums

List of 4x140 PCD Wheels ...

Justy ...

Audi Wheel ...

More info ...

BRS 15' Wheel ...

Fb ...

Gecko's ...