Gearboxes for sale

Jeff · Post by **Jeff** » Wed May 27, 2015 6:46 pm

Hi , i have a couple of gearboxes i no longer need.

1. L Series AWD center diff lock gearbox with EJ front cases so will bolt straight to your EJ. Comes with a modified gearbox crossmember and tailshaft to suit a Gen 3 Outback. G/C. $650.00

2. Version 2 WRX STi Gearbox 4.11
G/C $450.00. Can supply code if required.

Pick up near Gatton, Queensland or i can drop off in Brisbane .

I can be contacted here or phone 0413134382
Jeff

Jeff · Post by **Jeff** » Fri May 29, 2015 7:54 pm

Also got a VF2 turbo from low K import EA82T that has been buried in my shed for a long while. Open to offers

Jeff · Post by **Jeff** » Sun Jun 21, 2015 11:08 am

Bump, i thought these center diff lock boxes were hard to come by. I am negotiable

Phizinza · Post by **Phizinza** » Sun Jun 21, 2015 6:28 pm

They are hard to come by. I bought mine years ago for $450. Problem is, MY and L series stuff is getting old and a lot of the enthusiasts have moved on or they are on serious budgets. I'm surprised you haven't had an offer. Sorry I'm not looking to buy, but good luck with it!

EDIT: Oh and you probably would have more luck if you put the centre diff lock text in the title of the listing.

Jeff · Post by **Jeff** » Sun Jun 21, 2015 7:39 pm

Yeh fair comment . The tailshaft was about $400.00 from memory so i thought with the crossmember and the gearbox mods ie; EJ cases and L Series low range it was reasonable.

FujiFan · Post by **FujiFan** » Sun Jun 21, 2015 9:45 pm

Its the way of the world. When you have something you need/want/have made or use everyone else wants it. When you dont need or want it, nobody wants it.
Sooner or later someone will be after your items.

J.

Jeff · Post by **Jeff** » Mon Jun 22, 2015 1:54 pm

Yeh i am not concerned. I have 3 of them, if no one wants it i will use it in a car down the track. There is always a project on the go

wagonist · Post by **wagonist** » Mon Jun 22, 2015 2:06 pm

The centre diff lock isn't that hard, the 4wd Vortexes had them, its the dual range bit that's rare. If you had one of those to suit an EA82, then I'd be knocking at your door... :P

taza · Post by **taza** » Mon Jun 22, 2015 2:58 pm

Im keen on an L awd centre diff lock box. Thats the last thing i need for the back of my custom built dual range box in the forester!

Jeff · Post by **Jeff** » Mon Jun 22, 2015 3:46 pm

The one i am selling is a dual range with 1.59 low range. All it would need is ea82 front cases put back on it. And i am happy to keep the crossmember and tailshaft and negotiate the price

wagonist · Post by **wagonist** » Mon Jun 22, 2015 6:10 pm

How is the low range activated?
Rod through the rear casing like the L series, or cable directly to the low range pivot on the side of the case?
I currently have a single range with centre diff lock from a Vortex in my car, but with the black RX turbo interior (which was only dual range), the centre console looks like it's missing something.

Jeff · Post by **Jeff** » Tue Jun 23, 2015 9:46 am

The one i am selling is activated by a cable only

Phizinza · Post by **Phizinza** » Tue Jun 23, 2015 5:38 pm

The locking centre diff casings didn't have the rods through them.

Jeff · Post by **Jeff** » Tue Jun 23, 2015 8:09 pm

The one i am selling doesn,t no. The others do and i have a spare center diff lock that does

YouTube · Post by **El_Freddo** » Tue Jun 23, 2015 11:05 pm

Phizinza wrote:The locking centre diff casings didn't have the rods through them.

The dual range AWD locking boxes did. The single range didn't need it as there was no need.

If you've got a dual range L AWD box and no rods through the back of the box you've got one that's either been converted or had the centre diff and housing replaced with one from a single range box.

Cheers

Bennie

Jeff · Post by **Jeff** » Wed Jun 24, 2015 6:48 am

Correct. It was built to go in a GEN3 Outback so it didn,t matter.

wagonist · Post by **wagonist** » Thu Jun 25, 2015 9:26 pm

I currently have a single range, centre diff lock box in my car. Would you be interested in doing some kind of trade for the rear casing that has the provision for the low range rod?

I'll be in Brissie this weekend & heading to Toowoomba on Sunday. Could I schedule to meet you & have a look?

taza · Post by **taza** » Fri Jun 26, 2015 12:08 am

Is the spare centre diff lock and casing forsale?

Jeff · Post by **Jeff** » Fri Jun 26, 2015 8:08 am

Not sure, i will think about it