Mattims - L series parts

SuBaRiNo · Post by **SuBaRiNo** » Mon Nov 13, 2006 7:21 pm

Alex might want your alternator too.

Dave

Subafury · Post by **Subafury** » Mon Nov 13, 2006 8:22 pm

oh crap dont log on for a day and all the parts are gone

almost anyway.

PM sending...

subaruesh · Post by **subaruesh** » Tue Nov 14, 2006 12:35 am

have you still got the rims? are your tailgate struts in good condition?

mattims · Post by **mattims** » Tue Nov 14, 2006 9:13 am

i think 4muff was after the rims. and tailgate struts only hold up because of a buildup of mud and they are bent.

AndrewT · Post by **AndrewT** » Thu Nov 16, 2006 11:14 pm

Hey Mattims I've gotta releive you of the front stone-guard / Apron / air dampener panel (whatever people call it).
I got your number off Alex so hopefully I can swing by on Saturday arvo or something.

a.

Milla · Post by **Milla** » Fri Nov 17, 2006 3:43 am

How much you want for the springs, or handin those out for free, i got a post in some people are pigs take a look at pics this arvo

mattims · Post by **mattims** » Fri Nov 17, 2006 8:24 am

milla springs are already taken.. what side panels do you need for your car.. unfortunately the rear passenger side of my car is not good.

Milla · Post by **Milla** » Fri Nov 17, 2006 11:29 am

The rear right wheel arch is caved in, i dunno if i could get it stretched or replaced. i bet your rear doors in betta nick than mine.
will put pics up this arvo

AndrewT · Post by **AndrewT** » Fri Nov 17, 2006 12:57 pm

Milla wrote:i bet your rear doors in betta nick than mine.

HAHA! :P

mattim's rear passenger door.......yes.....

D3V1L · Post by **D3V1L** » Fri Nov 17, 2006 1:06 pm

ahahahahahhahahahahaahahahahaha
well siad andrew...lol

dave

Post by **Alex** » Fri Nov 17, 2006 6:46 pm

LOL..i agree...

alex

mattims · Post by **mattims** » Sat Nov 18, 2006 1:19 pm

I am actually heading out now until later tonight.

i have removed all springs. the webber and adapter. Headlights, parkers.

various little bits. I'll be at it again tomorrow probably .. but give me a call if you want something and ill tee up a time to get it.

aspro · Post by **aspro** » Sat Nov 18, 2006 5:46 pm

Sorry to hear it Matt,
Was your wagon aircond fitted and working?, I am after an evaporator unit and tx valve.
Cheers,
Aspro

waggaclint · Post by **waggaclint** » Sat Nov 18, 2006 7:58 pm

big thanks to matt got a couple of bits of him this morning...
cheers mate Clint.....

tim_81coupe · Post by **tim_81coupe** » Sun Nov 19, 2006 1:28 am

Got a rear bumper still or is it gone?

mattims · Post by **mattims** » Sun Nov 19, 2006 3:59 pm

i have a rear bumber still left .. and the air con was working.
If you guys want to pull those bits of today just come round i'll be home.

mattims · Post by **mattims** » Thu Nov 23, 2006 10:13 pm

okay the gar is going tomorrow or monday (whenever the scrap yard comes and gets it)... if you want anything i havent pulled off it tell me quick... Main bits i still have are

4 x 14" Rims and Tires (brendon i think)
4 x King Springs (and free struts) (i've been offered $75 from an interstate so if someone local can match or beat there yours)

1 x heavy duty clutch (only done around 1000ks) was great offroad. No you can't have the toe. ~$75 would be nice. And just in case your wondering its perfectly possible to remove a clutch without an engine crane and with the gearbox in place still.. on a completely seperate note, my back hurts.

I have parkers too cause i thought someone wanted them.

Aspro is this the bit you wanted.. Only took 20mins to get out and its got a crack where the pipes come out so you can have it for $15

and someone can have this bit for free if they tell me what it is .. fell out and i really can't figure out what it is.

SuBaRiNo · Post by **SuBaRiNo** » Thu Nov 23, 2006 11:34 pm

Gear box crossmember still there?

Dave

mattims · Post by **mattims** » Thu Nov 23, 2006 11:51 pm

aah crap yeah ... if the car doesnt get taken away tomorrow i will try and get it out. dont know how i will though .. if you could bring a hydraulic jack it would make life easier

and i forget ive got the webber and adapter too

Post by **Alex** » Fri Nov 24, 2006 7:16 pm

semi, semi, semi interested in the clutch...

alex