Installing Dual Carbs & Performance
Installing Dual Carbs & Performance
Just wondering who's installed Dual Carbs onto their standard EA81 (non-dual carb EA81) and what was needed?
I've heard that the EGR will need to be blocked off. Do the standard choke and throttle cable bolt up? And the manifold too? What about all the vacuum lines?
Also, once the carbs are on, are there any things I need to tune?
I've heard that the EGR will need to be blocked off. Do the standard choke and throttle cable bolt up? And the manifold too? What about all the vacuum lines?
Also, once the carbs are on, are there any things I need to tune?
'87 Targa Brumby
'83 Sherpa
'83 Sherpa
- hughybabes
- Junior Member
- Posts: 81
- Joined: Thu Oct 06, 2005 10:00 am
- Location: upwey/ victoria
G'day Xaymaca. Ive got twin carbs on a rebuilt twin exhaust port motor. I live up in the Dandenongs; not far from you. If you want, we could meet some time and you could have a look at how mine are set up. Much easier than photos and explanations.
1984 sportswagon
ea81 twin carburettor motor.
"d-shaped" siamese exhaust port heads.
mild low torque cam. electronic dizzy.
2.5 inch engine pipes; 2.25 tail pipe; rear sports muffler.
ea81 twin carburettor motor.
"d-shaped" siamese exhaust port heads.
mild low torque cam. electronic dizzy.
2.5 inch engine pipes; 2.25 tail pipe; rear sports muffler.
- hughybabes
- Junior Member
- Posts: 81
- Joined: Thu Oct 06, 2005 10:00 am
- Location: upwey/ victoria