
4 speed auto
4 speed auto
just fitted my 2.5 sti engine into my 85 rx turbo dunga and it has a 94 manual box out of an early liberty i know this box is crap and its all good to run the engine in but im after an auto and if it will fit into my tunnel and if any one has manualised the autos any help would be a champion effort.......

- Brumby Boy
- Junior Member
- Posts: 594
- Joined: Sun Oct 16, 2005 10:00 am
- Location: Townsville, Queensland, Australia
Rigoli is the only one i know of that has manualised these autos hes currently running one in his 8 sec gx
Long live the 1990 Subaru Brumby 2" lifted and soon to be mig locked
RIP 1992 Brumby
http://www.cardomain.com/ride/2507954
http://www.myspace.com/brumby_boy
few self-respecting ricers would spend the time to modify a Daewoo.

RIP 1992 Brumby
http://www.cardomain.com/ride/2507954
http://www.myspace.com/brumby_boy
few self-respecting ricers would spend the time to modify a Daewoo.

- Brumby Boy
- Junior Member
- Posts: 594
- Joined: Sun Oct 16, 2005 10:00 am
- Location: Townsville, Queensland, Australia
anything will fit... just depends how much you want to play with it hehe but from all acounts i dont think it would be too hard to fit up
talk to Chris_Rogers he is fitting one inhis GT 2 wagon but its a L series
talk to Chris_Rogers he is fitting one inhis GT 2 wagon but its a L series
Long live the 1990 Subaru Brumby 2" lifted and soon to be mig locked
RIP 1992 Brumby
http://www.cardomain.com/ride/2507954
http://www.myspace.com/brumby_boy
few self-respecting ricers would spend the time to modify a Daewoo.

RIP 1992 Brumby
http://www.cardomain.com/ride/2507954
http://www.myspace.com/brumby_boy
few self-respecting ricers would spend the time to modify a Daewoo.

- stamp_licker
- General Member
- Posts: 1066
- Joined: Wed Oct 05, 2005 10:00 am
- Location: Kallangur.Bris North
is your car lifted?Mine fitted in a 88 touring wagon but it was a auto to start,wider tunnel,have heard the early L tunnel may be narrower.there is a mob up here that makes a unit to replace the tcu so you can manual shift.Ive run mine on fwd auto loom added some switches and wires and have a speed sensor missing and it shifts beautifully.The cheapest/easist way is to use a auto loom and tcu to suit.
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D
Building a hardcore postie:D