Homemade g/box rubber mounts.

dwayneb · Post by **dwayneb** » Mon Sep 17, 2007 10:22 am

Did you get the Trevor Bell mounts as well Jack?

stamp_licker · Post by **stamp_licker** » Mon Sep 17, 2007 5:58 pm

If they are the trevor beel ones i've seen some,good idea.Building something similar for myself.

Jack · Post by **Jack** » Mon Sep 17, 2007 8:29 pm

Yep, I've fitted a pair of the mounts which Trevor developed. Are you using these on your Brumby too Dwayne?

dwayneb · Post by **dwayneb** » Tue Sep 18, 2007 8:11 am

Had them on for a while now.

vincentvega · Post by **vincentvega** » Tue Sep 18, 2007 8:13 am

will somebody post some pictures already!

Jack · Post by **Jack** » Tue Sep 18, 2007 6:45 pm

vincentvega wrote:will somebody post some pictures already!

lol. I don't have a camera so I can't post up an image.

Come to Citiview with the Club on Sunday and see these mounts first hand and decide yourself if they are the bee's knees.

We're meeting at Beaudesert McDonalds at 8am. Yarney's the trip leader, so if you are able to come along send him a PM.

Jack

stamp_licker · Post by **stamp_licker** » Tue Sep 18, 2007 8:31 pm

find, build,fit g/box and make sure it works before sunday .....doable.Will i ?

vincentvega · Post by **vincentvega** » Wed Sep 19, 2007 10:32 am

my new gearbag is in but it wont be making an appearance at cityview... muchos bad noises

bloody autos!

jack: note meeting place is The water tower corner of Talinga Drive & Mt Lindesay Highway, Park Ridge. there was an error in the mag

Jack · Post by **Jack** » Wed Sep 19, 2007 11:07 am

vincentvega wrote:my new gearbag is in but it wont be making an appearance at cityview... muchos bad noises

bloody autos!

jack: note meeting place is The water tower corner of Talinga Drive & Mt Lindesay Highway, Park Ridge. there was an error in the mag

Thanks for the accurate meeting place info.
(Maybe we should pay the monkey of a magazine editor something more than peanuts?)

stamp_licker · Post by **stamp_licker** » Wed Sep 19, 2007 12:49 pm

vincentvega wrote:my new gearbag is in but it wont be making an appearance at cityview... muchos bad noises

bloody autos!

jack: note meeting place is The water tower corner of Talinga Drive & Mt Lindesay Highway, Park Ridge. there was an error in the mag

What it didn't work?Whats it doing?About to try a fwd turned awd this weekend if all goes well.

stamp_licker · Post by **stamp_licker** » Wed Oct 03, 2007 4:50 pm

Here's the mount and crossmember i ended up fabbing

Another box section crossmember will be fabbed once i get some steel.

vincentvega · Post by **vincentvega** » Wed Oct 03, 2007 5:16 pm

got a bigger pic?

stamp_licker · Post by **stamp_licker** » Wed Oct 03, 2007 5:28 pm

Yeah here//http://s218.photobucket.com/albums/cc28 ... 0-Copy.jpg
and herehttp://s218.photobucket.com/albums/cc28 ... 9-Copy.jpg

steptoe · Post by **steptoe** » Wed Oct 03, 2007 9:04 pm

I ended up sticking an M6 bolt through the guts of both mine. It is a bit rigid at idle but OK above there so far, painted them black for the rego inspection coming up real soon

vincentvega · Post by **vincentvega** » Wed Oct 03, 2007 9:22 pm

nice job mate. looks tops