MY gearbox rubber mounts

Get the most out of your Engine / Gearbox with these handy hints ...
Post Reply
User avatar
vidler
General Member
Posts: 1055
Joined: Thu Oct 06, 2005 10:00 am
Location: Hamersley WA

MY gearbox rubber mounts

Post by vidler » Wed Sep 19, 2007 10:48 pm

just lettin you all know that these are available new from subaru. although a bit pricey at $53 each side
09 Forester XT Touring Wagon

User avatar
Matatak
Senior Member
Posts: 2393
Joined: Fri May 04, 2007 8:06 pm
Location: Gnangara next to pines

Post by Matatak » Wed Sep 19, 2007 11:01 pm

clearly u bought some im guessing..lol
(were u the winner of that Ally Bullbar on ebay which ended today? i think u were lol if so good pickup nice and cheap.)

neway are the Mounts not available aftermarket? from Veales or Coventrys? maybe
$53 is ridiculous for how small they are lol
Image
Wagon is no longer....:(

The Subaru Wacky Workshop
-All About the WA Boys :D

User avatar
90brumby
General Member
Posts: 1178
Joined: Mon Jan 29, 2007 10:58 pm
Location: Perth w.a

Post by 90brumby » Wed Sep 19, 2007 11:31 pm

i have some here they were on my brumby didnt think they were all that bad since ur sellin it

have u got some now
The New Owner Of hatchie
A 00 outback for doner car
2 door wrx being restored

owned plently of other subis before

User avatar
vidler
General Member
Posts: 1055
Joined: Thu Oct 06, 2005 10:00 am
Location: Hamersley WA

Post by vidler » Thu Sep 20, 2007 11:19 am

yeah bought em... yes i did win that bull bar on ebay:)
09 Forester XT Touring Wagon

User avatar
vidler
General Member
Posts: 1055
Joined: Thu Oct 06, 2005 10:00 am
Location: Hamersley WA

Post by vidler » Thu Sep 20, 2007 11:20 am

90brumby wrote:i have some here they were on my brumby didnt think they were all that bad since ur sellin it

have u got some now
my old ones had disintergrated completely
09 Forester XT Touring Wagon

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Thu Sep 20, 2007 11:37 am

NOT MY..but just found one of my L 4WD auto mounts is not stuffed but has parted on the bond , rubber to steel, and is in the vice with black silastic curing, hoping it will do for the time being. Never tried this before on mounts but given the resistance to parting silicone bonded stuff before I thought I'd give it a shot - at least to pass rego inspection.

User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Thu Sep 20, 2007 12:47 pm

i had a bucket load of L auto ones they all fail like that.Contact adhesive and a piece heavy rubber fixed em.
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

User avatar
Suby Wan Kenobi
General Member
Posts: 1914
Joined: Tue Oct 04, 2005 10:00 am
Location: Sunny Godwin Beach Qld

Post by Suby Wan Kenobi » Thu Sep 20, 2007 8:01 pm

They have come down in price i had to buy some a few years ago and they where $75 ea then and the only place that had em was Subaru
[SIGPIC][/SIGPIC]

The long road ahead

User avatar
Jack
Junior Member
Posts: 302
Joined: Fri Dec 16, 2005 10:00 am
Location: Brisbane
Contact:

Post by Jack » Thu Sep 20, 2007 8:17 pm

I phoned Ipswich Subaru two weeks ago and got quoted $77 each. :shock:

That's far too expensive and was the deciding factor to fit Trevor Bell's gearbox mounts. I did a heap of off-roading over the past two days and these mounts work very well. There's now bugger all slack in the gearbox and the Brumby felt solid over rutted and rocky terrain.

'twas a wonderful feeling after having driven with broken mounts in the past.

:)
1999 Outback (some mods)
1989 Brumby (more mods)

Image

Subaru - Symmetrical All-Wheel Drive

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Sat Sep 22, 2007 3:14 am

Trevor Bell ? I've paid 72 each in years past

Post Reply

Return to “Engine, Gearbox and Diff”