7" wide rims on a non-P/S Brumby ?

Get the low down on your ride ...
Post Reply
User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

7" wide rims on a non-P/S Brumby ?

Post by dfoyl » Mon Nov 05, 2007 6:58 am

I'm looking at changing from 14" pugs up to 15" rims and have turned up a set of 15x7s off a Navara. The pugs are 5.5" and run 195/70/14.

EDIT: Never mind, 7" wide doesn't fit under the fenders (wrong offset)...

Dean.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Top
User avatar
Matatak
Senior Member
Posts: 2393
Joined: Fri May 04, 2007 8:06 pm
Location: Gnangara next to pines

Post by Matatak » Mon Nov 05, 2007 6:22 pm

can get fender flares to help with the problem of not fitting under the fenders.

also add a bit to the look of it aswell IMO.
Image
Wagon is no longer....:(

The Subaru Wacky Workshop -All About the WA Boys :D
Top
User avatar
Phizinza
General Member
Posts: 1444
Joined: Mon Oct 10, 2005 10:00 am
Location: SA
Contact:
Contact Phizinza

Post by Phizinza » Tue Nov 06, 2007 8:49 am

I have 15x6" superlites on the Brumby with no-P/S running 215/60 street tyres.. No problems with the steering at all. And the car has a small "sports" steering wheel
Owned - 89 Brumby, 83 Wagon, 83 Leone 4WD Sedan, 83 Touring Wagon, 99 Outback
Own - 87 Brumby, 93 Liberty, 09 Forester
Offroading Subarus Facebook Page

Top
Post Reply

Return to “Brakes, Wheels and Tyres”