Liberty Bullbar

jackfoxinc · Post by **jackfoxinc** » Sun Nov 18, 2007 6:46 pm

Hey guys,
Does anyone know what the chances are of fitting a 94-98 Liberty bullbar onto an 89 Liberty? If it's possible, what mods need to be done?

Cheers

Luke

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Sun Nov 18, 2007 7:24 pm

It will basically bolt up to the front of the early model BUT the bit under the headlights will need modifing and possibly the ends in the wheel arch. The shape of the front profile is different so you may also end up with a gap infront of the grill.

jackfoxinc · Post by **jackfoxinc** » Sun Nov 18, 2007 7:35 pm

oh ok. Do you think it would be worth doing? Or too much of a muck around for something that would look a little dodgy anyway?

vincentvega · Post by **vincentvega** » Sun Nov 18, 2007 10:28 pm

how cheap are you getting it mate?

if its cheap enough it might be worth doing, but it is never gonan look right without some serious mods

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Sun Nov 18, 2007 10:55 pm

If your buying it new then dont worry but as VV says if its cheap enough it may be well worth doing

jackfoxinc · Post by **jackfoxinc** » Mon Nov 19, 2007 5:52 pm

It's $50. Unfortunately i dont have access to much of a workshop so serious mods arent really an option.

AlpineRaven · Post by **AlpineRaven** » Mon Nov 19, 2007 9:33 pm

Nah.. too hard, I have nudge bar from Gen 1 Liberty and does not fit on Gen 2 Liberty.
Cheers
AP

jackfoxinc · Post by **jackfoxinc** » Mon Nov 19, 2007 10:08 pm

By Gen 1 do you mean the 89 - 93 model? Sorry, im a bit of a newb.