EJ coil packs

vincentvega · Post by **vincentvega** » Wed Dec 05, 2007 12:54 pm

how do you find stuff in NZ ???

i need a couple of S1 turbo grilles... they would be a dime a dozen in NZ

Chris_Rogers · Post by **Chris_Rogers** » Wed Dec 05, 2007 1:02 pm

vincentvega wrote:how do you find stuff in NZ ???

i need a couple of S1 turbo grilles... they would be a dime a dozen in NZ

get a lot of stuff from christchurch myslef. if new armstrong's in CHCH if used

roscoes in ashburton (http://www.yellowpages.co.nz - can't remember the phone #..)
both are in the south island and take 4-5 days to get here.

armstrongs can get NEW bits for L series if you want to wait a few days ( locally they can't be bothered.)

thats where the coils came from.

Morcs · Post by **Morcs** » Thu Jan 17, 2008 5:40 pm

I Know this thread is a little old But i am Chasing where to buy some coils for my Brumby Has the coil on sparkplug type wanting to put the boshc hec716 as suby ones are giving me greif Changed out 4 in 6 months Not Fun on a dual cammer
. Problem is mine are the 2 wire ones off the early liberty can only seem to get S/H ones. Can anybody help me with a supplier. Would like to go to the Boshc ones if cheaper and do the same job

I can change loom to a three wire if needed

AndrewT · Post by **AndrewT** » Thu Jan 17, 2008 5:46 pm

I think these should be available through Coventrys

Chris_Rogers · Post by **Chris_Rogers** » Thu Jan 17, 2008 7:16 pm

mine are two wire - I'll grab the part off them. in regard to bosch items they are a straight wire in.

Morcs · Post by **Morcs** » Thu Jan 17, 2008 8:38 pm

Yeah Would have gone to covs if still in wa LOL

Morcs · Post by **Morcs** » Thu Jan 17, 2008 8:40 pm

Difference in three to two wire is that one of the wires is that the third wire goes to ground on the motor/engine block.

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Thu Jan 17, 2008 10:42 pm

Dunno what part of the CC you are on but on the North end Autobarn Tuggerah where on par with Supachump on price and quite often less.

Morcs · Post by **Morcs** » Sun Jan 20, 2008 2:15 pm

Might ask how much at autobahn at tuggs. Got friend that is Mechanic (owns shop) See if he can get them any cheaper. His had a few libertys come in with similar problems and only knew about s/h one fitting.
Cheers thanks for the help.