So i'm installing HID kits to my quad lights:) they consist of two H4 with high low beams and two H1 for high beam only. I wired the H4 kit already and it works fine. As most Hid kit its working with only one side or the factory head light/globe connector.
So i want to use the other side for the H1's so that i don't need to cut a splice.
Only thing is i can't figure out which is the trigger for the high beam. Looking into the plug and using a test light i see that the middle blue connector is earth, the RH RED has power when i flick to both on high and low beam and the LH YELLOW connector has power only on low beam...

Now if i connect the hid light to the RED i have the light constantly on and when i connect it to the yellow its only on on low beam.
How do i get it to turn on only when i flick it to high beam?
Pretty sure it would be the same wire trigger used to get spot light to go on only on high beam. What have those who set up there spot light that way done?
Thx