Perth roll call.

vidler · Post by **vidler** » Tue Feb 13, 2007 6:31 am

3" or 4" lift kit? definantly required

SuBaRiNo · Post by **SuBaRiNo** » Tue Feb 13, 2007 7:23 pm

LOL yeah... they wont last long without a lift... maybe make it around the block... make some nasty mess of your fenders though.

Dave

vidler · Post by **vidler** » Tue Feb 13, 2007 8:40 pm

found another supplier of the BF goodrich's. bob jane T mart in balcatta on ledgar RD

$210 fitted and balanced each wheel

Subafury · Post by **Subafury** » Tue Feb 13, 2007 9:44 pm

haha one guy from that t-mart didnt know **** about the tyres we wanted for seans L. he was like what the hell do u want that profile for?! then i showed him my car

(the green ian diffen store up the road there on erindale gave us the best price)

90brumby · Post by **90brumby** » Fri Feb 23, 2007 11:42 pm

just got my 27's fitted without a lift kit the only difference with height is the bolts under the spring on the front strut and the torshbars at the back have been wound up
the tyres only have slight amout of rubbing on the back side of the front fenders

Suba · Post by **Suba** » Sat Feb 24, 2007 8:06 pm

90brumby wrote:just got my 27's fitted without a lift kit the only difference with height is the bolts under the spring on the front strut and the torshbars at the back have been wound up
the tyres only have slight amout of rubbing on the back side of the front fenders

That surprises the hell out of me as I had the 27's on the front of my MY wagon rub and I had a four inch lift kit and a further inch or so with bigger springs , I also had the front guard cut and cut grinded the rear of the fron wheel well

.

Mike.

SuBaRiNo · Post by **SuBaRiNo** » Sat Feb 24, 2007 8:19 pm

Would depend on the offset of the rims... for example... pug rims can fit HUGE tires on without scrubing and with no lift... the same size tires on rats will scrub badly.

I am surprised too that he has got away with such a big tyre without lift.

Dave

Post by **Alex** » Sat Feb 24, 2007 9:07 pm

yeah, my tyre's are like 26.5inch and they scrub a bit with a 3inch lift and all new suspension..

alex

90brumby · Post by **90brumby** » Sat Feb 24, 2007 11:05 pm

yep only had to slightly trim the front garuds but the rear required no mods at all

hers a few pics
the pic (its also upside down this is the pic im talkin about) with the spring is the lift on the front im not sure wat others cars have this but yer its the only lift mines got

Post by **Alex** » Sat Feb 24, 2007 11:24 pm

90brumby, do you ever drive down Manning road? i see a very similar brumby fairly often...

alex

SuBaRiNo · Post by **SuBaRiNo** » Sun Feb 25, 2007 10:26 am

I assume that close up pic was of the strut top from under the guard... i have never seen anything like that.

Usually that size tire would result in massive tire rub on the firewall behind each wheel when turning.... i had to bach the hell out of mine even with the 3 inch lift.... I wonder what that strut top does to change that.

Dave

Suba · Post by **Suba** » Sun Feb 25, 2007 10:52 am

It is very interesting , hey dave !.

Mike.

SuBaRiNo · Post by **SuBaRiNo** » Sun Feb 25, 2007 10:57 am

I think we need more pics of your struts 90brumby.

Dave

Suba · Post by **Suba** » Sun Feb 25, 2007 11:00 am

there you go again Dave , just wanting tio look at pics

Mike.

90brumby · Post by **90brumby** » Sun Feb 25, 2007 9:31 pm

um yer im only on my L's and dont really go down manning road
ill take some more pics 2morrow 4 ya cause i still have some tyre rub and off the top of the gaurd every time i go up a curp or into a car park

SuBaRiNo · Post by **SuBaRiNo** » Sun Feb 25, 2007 9:56 pm

Yeah some more of the struts would be good... i want to know whats going on there. Thanks

Dave

90brumby · Post by **90brumby** » Wed Feb 28, 2007 4:40 pm

here they are i had to edit one of the pics to make it fit

r these struts not standard if not do u no wat they r

90brumby · Post by **90brumby** » Wed Feb 28, 2007 10:28 pm

here they are i had to edit one of the pics to make it fit

r these struts not standard if not do u no wat they r

Suba · Post by **Suba** » Wed Feb 28, 2007 10:35 pm

Yeah they are standard , the pic that confused dave of your strut was because the pic is upside down and very dark , making it look weird.

Mike.

90brumby · Post by **90brumby** » Wed Feb 28, 2007 11:39 pm

so all brumbys come out with some form of a factory lift