gear box dismantle?

Post by **Captain Obvious** » Fri Jun 29, 2007 6:38 am

im pulling apart a L series dual range but im suck on how to get the rear part of the case off? there seems to be the gear linkage in getting caught? any ideas or tricks?

cheers bryan

vincentvega · Post by **vincentvega** » Fri Jun 29, 2007 11:55 am

theres a big thread on dismantling on the rlsc forum

Outback bloke · Post by **Outback bloke** » Fri Jun 29, 2007 7:41 pm

Brian, you have to undo the 10mm bolt head on the reverse gear switch arm.

Post by **Captain Obvious** » Fri Jun 29, 2007 9:37 pm

can you see that from the top were you take the 4X4 cover plate off??

Outback bloke · Post by **Outback bloke** » Sat Jun 30, 2007 7:01 am

Yes, it is down on the left hand side. Shine a torch in there and you will see it.

Post by **Captain Obvious** » Sat Jun 30, 2007 6:37 pm

got it! but had to work out how to get all the 4x4 linkage stuff on top out of the way, very interesting inside, think im ready to pull the lib one apart now!!