Thrust bearing clips
Thrust bearing clips
hi,
ive taken out the old engine and have found that there is only 1 clip holding the thrust bearing onto the clutch lever. Where would i find another clip as the new bearing didnt come with any.
cheers,
adam
ive taken out the old engine and have found that there is only 1 clip holding the thrust bearing onto the clutch lever. Where would i find another clip as the new bearing didnt come with any.
cheers,
adam
Probably available through Subaru...I've always just scrounged one from somebody else who might have spares. You can use handy-wire bent to the right shape but this isn't the best solution!
Chuck up a wanted add I'd say.
Chuck up a wanted add I'd say.
EZ30 L series - Monsterwagon
https://www.ausubaru.com.au/viewtopic.php?f=71&t=26163
https://www.ausubaru.com.au/viewtopic.php?f=71&t=26163
Adam I got stuck for one too once (country area on weekend)
Compare to a D shaped snap joiner at a fishing tackle shop and you will find one exactly the size and one gentle bend away from identical.
Stainless and tempered it lasted until I swapped gearboxes again.
Compare to a D shaped snap joiner at a fishing tackle shop and you will find one exactly the size and one gentle bend away from identical.
Stainless and tempered it lasted until I swapped gearboxes again.
1989 Subaru WonderBrumby II
EJ22 Dual range AWD lifted, widened and much happier now thanks very much.
1991 L Series wagon, white and perfectly normal apart from the ticking, no I think that is normal.
Jet boat..webbered EA81 with a hybrid tin dish welded and glued to it.
EJ22 Dual range AWD lifted, widened and much happier now thanks very much.
1991 L Series wagon, white and perfectly normal apart from the ticking, no I think that is normal.
Jet boat..webbered EA81 with a hybrid tin dish welded and glued to it.
- FROG
- General Member
- Posts: 1409
- Joined: Fri Feb 23, 2007 12:41 pm
- Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
- Contact:
30539aa000 Clip 2.48 + Tax
Just Buy A New One Lol
Quick Before They Put The Price Up Lol
Just Buy A New One Lol
Quick Before They Put The Price Up Lol
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
I would use the proper part for this... i had the same problem.
Just so you know... EA81 boxes have the exact same clips.
Dave
Just so you know... EA81 boxes have the exact same clips.
Dave
EJ conversion wiring harness cut downs available. Please PM or email ([email protected]) for details.
it dont matter...it runsSubafury wrote:yeh i lost one out of the 2 one mine. i cant remember if we actually used a replacement or not on this box. will find out shortly tho

plus u got 2 more now lol..cost u a mintload for them...wulda been cheaper to buy new
but look at all teh freebies u got iwth em

lol...no1 probly undastands that but it was funny to me
Wagon is no longer....

The Subaru Wacky Workshop -All About the WA Boys
